Jest dysk SSD Cruciala, jak w topicu, dysk działa w sensie, że się
pokazuje i odpowiada, ale jakiekolwiek próby użycia kończą się
wewnętrznymi błędami użytych narzędzi, czy to hdparma czy narzędzi od
partycji.
Oto jego smart:
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: CT480BX500SSD1
Serial Number: 2011E3EF0DF3
LU WWN Device Id: 0 000000 000000000
Firmware Version: M6CR022
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jan 27 20:44:08 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 000 100 000 Pre-fail
Always - 0
5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age
Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 3647
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 2059
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always
- 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always
- 0
173 Ave_Block-Erase_Count 0x0032 007 007 000 Old_age Always
- 145
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always
- 264
180 Unused_Reserve_NAND_Blk 0x0033 100 100 000 Pre-fail Always
- 224
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always
- 99
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 073 021 000 Old_age Always
- 27 (Min/Max 7/79)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always
- 243
202 Percent_Lifetime_Remain 0x0030 093 093 001 Old_age
Offline - 7
206 Write_Error_Rate 0x000e 000 000 000 Old_age Always
- 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always
- 0
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always
- 27158810210
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always
- 848712819
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always
- 1106748960
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 1
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e5 00 00 00 00 00 00 08 00:00:00.000 CHECK POWER MODE
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
60 08 48 60 18 84 40 08 00:00:00.000 READ FPDMA QUEUED
60 20 30 20 e7 88 40 08 00:00:00.000 READ FPDMA QUEUED
60 20 e0 b0 a8 89 40 08 00:00:00.000 READ FPDMA QUEUED
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA
60 00 88 00 00 00 40 08 00:00:00.000 READ FPDMA QUEUED
ec 00 01 00 00 00 00 08 00:00:00.000 IDENTIFY DEVICE
ec 00 01 00 00 00 00 08 00:00:00.000 IDENTIFY DEVICE
ec 00 01 00 00 00 00 08 00:00:00.000 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 60% 3632
-
# 2 Short offline Completed without error 00% 3632
-
Czy da się z nim coś zrobić?
--
pzdr
Roman
|