Bartek Szelc napisał(a):
> Mam dwa dyski twarde WD Caviar 120 GB (IDE1 Master) i Quantum 40 GB (IDE 2
> Slave
> Kiedys brat wyniosl do kumpla ten maly dysk i przy podpinaniu go spowrotem
> na to samo miejsce w ten sam sposob pojawil sie problem ze nie chce wykryc
> dysku 120 GB. Wykrywanie przy starcie kompa trwalo strasznie dlugo i nie
> dawalo zadnych efektow. A wejscie do biosu granuiczylo z cudem.
u mnie był podobny problem - poprostu dysk WD, jeżeli jest jako jedyny
na kablu, zamiast master musi być stawiony jako cable select (OIDP).
Question:
What problems can occur if an EIDE hard drive is jumpered incorrectly in
a PC?
Answer:
The following list includes problems that can happen on a PC if an EIDE
hard drive is installed with the jumper shunt set incorrectly on the drive.
* The computer freezes while booting and will not boot at all.
* The PC is unable to detect the drive that is jumpered incorrectly.
* The PC is slow to detect the IDE devices while booting. Booting
may take several minutes.
* The computer will boot, but performance is slow.
wszystko o ustawieniach zworek -> http://skocz.pl/gyl
to tak na pierwszy ogień, zanim zaczniesz bawić się w zmianę elektroniki
dysku ;)
-- pozdrawiam, Paweł Starzyński despera+Received on Tue Sep 28 23:15:16 2004
To archiwum zostało wygenerowane przez hypermail 2.1.8 : Tue 28 Sep 2004 - 23:51:27 MET DST