Przeskanowałem jakimś programem znalazł na 159 sektorach "bad CRC"
Czy pomorze low level format?
Tutaj jeszcze daje loga ze S.M.A.R.T (przy uruchamianiu kompa Status: BAD)
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 8452 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8452 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 ff 6f 0f f0 Error: UNC at LBA = 0x000f6fff = 1011711
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 ff 6f 0f f0 00 05:19:46.100 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:46.100 READ DMA
40 00 10 ef 6f 0f f0 00 05:19:42.900 READ VERIFY SECTOR(S)
40 00 10 df 6f 0f f0 00 05:19:39.300 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:39.300 READ DMA
Error 8451 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 ef 6f 0f f0 Error: UNC at LBA = 0x000f6fef = 1011695
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 ef 6f 0f f0 00 05:19:42.900 READ VERIFY SECTOR(S)
40 00 10 df 6f 0f f0 00 05:19:39.300 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:39.300 READ DMA
40 00 10 cf 6f 0f f0 00 05:19:35.650 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:35.650 READ DMA
Error 8450 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 10 df 6f 0f f0 Error: AMNF at LBA = 0x000f6fdf = 1011679
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 df 6f 0f f0 00 05:19:39.300 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:39.300 READ DMA
40 00 10 cf 6f 0f f0 00 05:19:35.650 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:35.650 READ DMA
40 00 10 bf 6f 0f f0 00 05:19:31.600 READ VERIFY SECTOR(S)
Error 8449 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 10 cf 6f 0f f0 Error: AMNF at LBA = 0x000f6fcf = 1011663
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 cf 6f 0f f0 00 05:19:35.650 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:35.650 READ DMA
40 00 10 bf 6f 0f f0 00 05:19:31.600 READ VERIFY SECTOR(S)
40 00 10 af 6f 0f f0 00 05:19:28.350 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA
Error 8448 occurred at disk power-on lifetime: 24 hours (1 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 10 bf 6f 0f f0 Error: AMNF at LBA = 0x000f6fbf = 1011647
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 bf 6f 0f f0 00 05:19:31.600 READ VERIFY SECTOR(S)
40 00 10 af 6f 0f f0 00 05:19:28.350 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA
c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA
c8 00 01 00 00 00 f0 00 05:19:28.300 READ DMA
Received on Sun Apr 13 19:35:31 2008
To archiwum zostało wygenerowane przez hypermail 2.1.8 : Sun 13 Apr 2008 - 20:25:16 MET DST