Czy ktoś potrafi poniższy raport ze sprawdzenia twardego dysku przełożyć
na bardziej zrozumiały język? Z góry dzięki za interpretację.
SeaTools Desktop v3.00.06
Copyright (c) 2004 Kroll Ontrack Inc.
7/26/2004 @ 3:48 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 05/19/04
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
120 GB ST3120026A
Serial Number = 3JT1LA2H
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 14593x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 1083 8916
EXTENDED
2 NTFS 1084 6629 45620
EXTENDED
3 NTFS 6630 12175 45620
EXTENDED
4 NTFS 12176 14592 19881
Diagnostic Results:
Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 26-Jul-2004 12:22:26
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026A
Serial Number: 3JT1LA2H
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 368640
Estimated PIO Transfer Rates
Min: 2.50MB/s Max: 2.56MB/s Avg: 2.54MB/s
Estimated DMA Transfer Rates
Min: 83.90MB/s Max: 111.86MB/s Avg: 88.83MB/s
SMART Check: Passed
Short Test Passed: 26-Jul-2004 12:23:08
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Passed with Minor Error(s)
At least one bad sector was found during the surface scan
of this drive and all such sectors were successfully
reallocated by SeaTools. However, any content in these
individual sectors could not be retrieved and possible file
system errors may still be present. Please review the
information below for more details.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 26-Jul-2004 12:23:09
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026A
Serial Number: 3JT1LA2H
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Check: Passed
Full Scan (0 to 234441648) - Errors
---------------------------
|LBA |Error Register|
---------------------------
|23597901 |40h |
---------------------------
Long Test Failed: 26-Jul-2004 14:19:41
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
The Following Sectors MAY be damaged
------------------------------------
LBA: 23597901
STATUS: Overwrite SUCCESSFUL!
USAGE: Used in the file: \$BadClus
If this is a directory, any contained files or subdirectories
may be inaccessible.
File Structure Test Result:
Partition 1 (NTFS (8.9 GB) WINDOWS) Result: Failed with critical
Errors
NOTE: Any report of possible errors in the file system tests are
for
informational purposes only. We suggest you should consider testing
with
the official file system diagnostic utilities for your operating
system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (45.6 GB) U{YTKI) Result: Failed with critical
Errors
NOTE: Any report of possible errors in the file system tests are
for
informational purposes only. We suggest you should consider testing
with
the official file system diagnostic utilities for your operating
system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 3 (NTFS (45.6 GB) GRY) Result: Failed with critical
Errors
NOTE: Any report of possible errors in the file system tests are
for
informational purposes only. We suggest you should consider testing
with
the official file system diagnostic utilities for your operating
system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 4 (NTFS (19.8 GB) INNE) Result: Failed with critical
Errors
NOTE: Any report of possible errors in the file system tests are
for
informational purposes only. We suggest you should consider testing
with
the official file system diagnostic utilities for your operating
system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
-- ////// ( o o) GG: 660675 --ooO-( )-Ooo- *W nagłówku adres antyspamowy zakodowany w ROT13*Received on Mon Jul 26 19:10:19 2004
To archiwum zostało wygenerowane przez hypermail 2.1.8 : Mon 26 Jul 2004 - 19:51:30 MET DST