Autor: AnkaS (inv.stona_at_fuw.edu.pl)
Data: Mon 26 Mar 2001 - 13:15:49 MET DST
Sprobuj sciagnac sterowniki z 3Com http://www.3com.com/,
np. 3c905B-TX wg. opinii producenta
nie lubi sterow windzianych, woli wlasne.
Przesyłam fragment z readme
Installing EtherDisk Diskette 4.01b
-----------------------------------
IMPORTANT: If you have a 3C900 or 3C905 NIC installed in a PC
running Windows 98, you must run the following NIC preinstallation
program to remove the default NIC driver and .INF files that come with
Windows 98. If you do not run the preinstallation program, the NIC driver
will not install successfully.
To run the NIC preinstallation program:
1. Do not install the NIC in the PC.
2. Power on the PC.
3. Run the PREINSTL.EXE file.
After the preinstallation program finishes, power off the PC
and follow the installation procedure below.
Windows 98 Installation Instructions
-----------------------------------------------------------------
1. Install the NIC and start the computer. Make sure the NIC is
connected to the network.
2. Start Windows 98. During the boot up, Windows 98 will display a
screen showing that a PCI Ethernet Controller has been detected.
Put the EtherDisk into the floppy drive and press "next".
3. Windows 98 will ask you to choose the recommended search or to
select from a list. Use the recommended Search and click "next".
4. Windows 98 will display a list of areas to search for the driver.
Check only the floppy drive (A:\). Press "next". Windows 98 will
read the EtherDisk and display the adapter name. Click "next" to
accept. Windows 98 then reads files from the Etherdisk, then asks
you for the Windows 98 CD-ROM. Once it finishes copying files it
will return you to the add new hardware wizard. Press the "finish"
button when it appears. If Windows 98 cannot find the Windows 98
installation media, it will prompt you for the path to the media
(CD_ROM, etc). You must provide this path for the install to work
successfully.
5. Windows 98 then displays the message "Do you want to restart your
computer now?". Press the "yes" button.
6. The computer will reboot. When the system has booted up, the
network is ready to use.
Pozdro Anka
To archiwum zostało wygenerowane przez hypermail 2.1.7 : Tue 18 May 2004 - 21:43:48 MET DST