Re: Umierający (?) dysk twardy

Saiko Kila wrote:

> No to dobrze, może temu dyskowi nic nie będzie? Takie błędy się
> zdarzają, np. przy zmianie trybu pracy, sterowników itp.

To chyba sie po prostu kabel poluzowal. Co za *(&^*!@%#&#$ wymyslil kable
SATA samoczynnie wylatujace z gniazdek?! Na wszeli wypadek wymieniłem kabel,
popsikalem kontaktem i jeszcze go umocuje dodatkowo zeby przy transporcie
kompa nie luzowal się.

No ale zeby komputer wylaczal sie bez slowa?!

Jest jakis program zeby pomęczył dysk? Znaczy cos z live CD zeby pomachalo
glowicami, na razie zapusciłem badblocka

Raport ze smarta (po wymianie kabla):

=== START OF INFORMATION SECTION ===
Device Model: ST3300622AS
Serial Number: XXXXXXX
Firmware Version: 3.AAH
User Capacity: 300,069,052,416 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Mar 31 00:33:19 2007 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

...

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x000f 112 095 006 Pre-fail
s - 0
  3 Spin_Up_Time 0x0003 098 097 000 Pre-fail
s - 0
  4 Start_Stop_Count 0x0032 100 100 020 Old_age
ys - 935
  5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
s - 0
  7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail
s - 99626832
  9 Power_On_Hours 0x0032 097 097 000 Old_age
ys - 2881
 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
s - 0
 12 Power_Cycle_Count 0x0032 100 100 020 Old_age
ys - 933
187 Unknown_Attribute 0x0032 100 100 000 Old_age
ys - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age
ys - 0
190 Unknown_Attribute 0x0022 054 052 045 Old_age
ys - 774176814
194 Temperature_Celsius 0x0022 046 048 000 Old_age
ys - 46 (Lifetime Min/Max 0/19)
195 Hardware_ECC_Recovered 0x001a 072 061 000 Old_age
ys - 33951319
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
ys - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
line - 0
199 UDMA_CRC_Error_Count 0x003e 200 167 000 Old_age
ys - 53718
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
line - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
ys - 0

...

Error 7401 occurred at disk power-on lifetime: 2857 hours (119 days + 1
hours)
  When the command that caused the error occurred, the device was active or
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 6f 91 4d 07 e0 Error: ICRC, ABRT 111 sectors at LBA = 0x00074d91 =
478609

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  -- -- -- -- -- -- -- -- ---------------- --------------------
  c8 00 80 80 4d 07 e0 00 00:02:01.180 READ DMA
  c8 00 80 00 4d 07 e0 00 00:02:01.179 READ DMA
  c8 00 80 80 4c 07 e0 00 00:02:01.178 READ DMA
  c8 00 80 00 4c 07 e0 00 00:02:01.177 READ DMA
  c8 00 80 80 4b 07 e0 00 00:02:01.176 READ DMA

(tych bledów jest więcej w logu - tj. 7400, 7399 itd.)
...

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00%
9 -
# 2 Extended offline Completed without error 00%
9 -
# 3 Extended offline Interrupted (host reset) 90%
7 -
# 4 Short offline Completed without error 00%
7 -
# 5 Short offline Aborted by host 90%
7 -
# 6 Short offline Aborted by host 80%
7 -
# 7 Short offline Interrupted (host reset) 60%
6 -
# 8 Short offline Completed without error 00%
6 -
# 9 Short offline Completed without error 00%
1 -
#10 Short offline Completed without error 00%
1 -

SMART Selective self-test log data structure revision number 1
 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

-- 
pozdrawiam
      Mikolaj